Nd:Yag laser crystal rod D7*100/115/120/130/140/150/160/165mm

Product Description


Neodymium-doped yttrium aluminum garnet (Nd:YAG) crystal is the earliest and most famous laser crystal. Its superior basic properties make it often used in near-far infrared solid-state lasers and their frequency doubling and frequency tripping. It is widely used in medical, industrial and military lasers. Can be ordered according to customer requirements, welcome to inquire!


 


Advantages of Nd:YAG crystals:


1. High gain, high efficiency, and low laser threshold;


2. High optical quality, less absorption of 1064nm light wave;


3. Good mechanical and thermal properties;


4. It is suitable for multiple working modes (continuous, pulse, Q-switch, mode locking).



Common model:



 

型号

直径(mm) 长度(mm) 价格(元)
3×67 3 67
3×120 3 120
4×120 4 120
5×120 5 120
6×105 6 105
6×120 6 120
6×130 3 130
6×145 6 145
6×150 6 150
6.35×105 6 105
7×120 7 120
7×130 7 130
7×145 7 145
7×1 7 155
8×130 8 130
8×145 8 145
8×155 8 155
8×165 8 165
8×185 8 185
8×210 8 210


Technical Parameters


 


Doping concentration                                                                 Nd: 0.1~1.3at%


Crystal orientation                                                                      [111] or [100], within 5° deviation


Wavefront distortion                                                                   See below


Extinction Ratio                                                                            See below


Crystal rod size                                                                           Diameter: 2~15mm, length: 3~200mm, can be 


customized according to customer requirements


Dimensional tolerance                                                               Diameter: +0.00/-0.05mm, length: ±0.5mm


Cylindrical processing                                                                400# abrasive for fine grinding or polishing


Parallelism of end face                                                                  ≤ 10"


Perpendicularity between end face and rod axis                           ≤ 5′


Flatness of end face                                                                    λ/10 @632.8nm


Surface Quality                                                                           10-5 (MIL-O-13830A)


Inverted                                                                                       0.15±0.05mm


Anti-reflection coating reflectivity                                               ≤ 0.25% @1064nm


Anti-laser damage threshold of film                                            ≥500MW/cm2


Ce:YAG scintillation crystal

CTH:YAG laser crystal

Potassium Titanium Oxide Phosphate (KTiOPO4, KTP for short) crystal

Frequency doubling crystal KTP, KTP crystal, continuous frequency doubling crystal, laser ranging OPO crystal

Ce: Nd: YAG crystal rod yellow rod special for laser welding Φ7*110mm